tritech inc. main logo

Questions?
Give us a call

1-800-886-7004
8AM-5PM, M-F EST






Labnet Enduro PAGE System with PAGE Insert, Buffer Tank (Leads & Cooling Pack)

Labnet Enduro PAGE System with PAGE Insert, Buffer Tank (Leads & Cooling Pack)


    SKU: E2010-P
    Price: $0.00
    Quantity:

    Enduro PAGE system, includes PAGE insert, buffer tank with leads and cooling pack
     
    Ordering Information

    Catalog Number

    Item Description

    Price 


    Product Information

    Labnets Enduro Vertical PAGE System is modular - allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing the inserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately.

     

     

    MODULAR SYSTEM - The modularity of the Enduro System is based on three operational inserts and a common buffer tank. All three inserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank.

     

     

    PAGE INSERT - Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert and held into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.


    Modular Tank with PAGE Insert

     

    ELECTROBLOTTING INSERT - The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes are then placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a high intensity current, allowing transfer to take place in about an hour.


    Blotting Module

     

    2D ELECTROPHORESIS INSERT - This insert is used for running the first dimension of IEF gels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasket ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.


    2D Module

     

    BUILT FOR SAFETY AND ENDURANCE - For leak proof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power to the electrodes.

     

     

    ACCEPTS MOST PRE-CAST GELS - Most precast gels, including NuSep", Bio-Rad", Invitrogen" and Cambrex" can be used with the Enduro PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize.

     

     

    WIDE RANGE OF ACCESSORIES - A variety of combs and spacers of varying widths are available to customize your Enduro system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacers permanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well as capillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.


    Casting Stand and Combs

     


    Product Specifications

    Enduro PAGE System

     

    Gel Dimensions

    10 x 10 cm

    Capacity

    2 gels/run*

    Maximum samples

    20 per gel

    Tank (WxDxH)

    19 x 13 x 15 cm

    Buffer volume

    250 mL

    Enduro PAGE Electroblotting System

     

    Gel Dimensions

    NA

    Capacity

    3 gels/transfer

    Maximum samples

    NA

    Tank (WxDxH)

    19 x 13 x 15 cm

    Buffer volume

    1200 mL

    Enduro PAGE 2D System

     

    Gel Dimensions

    8 cm long

    Capacity

    10 tubes/run

    Maximum samples

    10 (1/gel)

    Tank (WxDxH)

    19 x 13 x 15 cm

    Buffer volume

    500 mL

     



    Contact Us | About Us | Return Policy | Custom Machining | Equipment Service | Part & Drive Sales | Refurbished Equipment | FAQ | NISA | Testimonials

    Tritech Inc.  |  600 Central Avenue, E.  |  Edgewater, MD 21037  |  800.886.7004  |  fax 410.798.7671  | admin@tritechinc.com

    Blog | Careers | Privacy Policy | Sitemap | List of Cities Served | List of Centrifuges Serviced

     
    Tritech serves laboratories in the following states: Connecticut, Delaware, Florida, Maryland, New Jersey, Pennsylvania, Rhode Island, Virginia, and Washington DC